Please update ur browser to surf this page

Embedded module TQMa8XxS

with ARM® Cortex™ A35 based on i.MX8X

ARM Cortex™-A35 module with i.MX8X from NXP.


  • Graphic with 4K Support
  • DSP for audio processing
  • High-speed communication via 2x Gigabit, Ethernet, 1x PCle and 1x USB 3.0 interface
  • Low power consumption (typ. 4 W)
  • Integrated 1 x Cortex M4 CPU (Real Time/ Security)
  • 2x CAN FD
  • Integrated security functions


  • Base


    The Minimodule TQMa8XxS is based on the processor ARM® Cortex™ A35 core technology. The integrated high performance graphics supports applications with high display requirements. Full access to all signal pins guarantees a very flexible usage and a cost-efficient project development. For various requirements three CPU variants with a different performance and features are available. With a Dual / Quad-Core ARM Cortex™ A35 core and a clock rate up to 4 x 1,2 GHz the module provides a balanced ratio between high performance and power dissipation.

  • Detail




    NXP MCIMX6 Solo/Dual Light/Dual/Quad Cortex A9

    CPU frequency:

    Up to 1,2 GHz

    System interfaces


    1x USB 2.0 High-Speed Host | 1x USB 2.0 High-Speed OTG | Up to 2x USB High-Speed Inter-Chip (HSIC)


    2x FlexCAN





    SSI / I²S:

    Up to 3x


    1x 10/100/1000 Mbit (IEEE 1588)


    Up to 5x CSPI


    Up to 5x


    Up to 2x

    Operating systems / User interfaces

    Operating systems on request:

    Windows Embedded 7, Android

    Operating systems:

    Linux, VxWorks, QNX



    Up to 128 MB


    Up to 2 GB | MCIMX6 Solo with 1 GB


    0 / 64 kbit

    e-MMC Flash:

    Up to 16 GByte

    Other interfaces & busses




    CPU JTAG Interface


    Power supply:

    5 V

    Temperature range:

    -25°C ... +85°C

    Temperature sensor:



    In Production


    2x 16-Bit Camera Interface

    Plug system:


    Pin number:



    70mm x 46mm

    Temperature range, extended:

    -40°C ... +85°C






    Graphic interfaces:

    LCD Interface LVDS | HDMI

  • Downloads

    for Embedded module TQMa8XxS

  • Ordering


    TQMa8XDS-AA (Prototypes Q3/18)
    i.MX8X Dual/1,2 GHz, 8 GB eMMC Flash, 1 GB DDR3L, 64 kB EEPROM, -25°C…+85°C

    TQMa8XDPS-AA (Prototypes Q3/18)
    i.MX8X Dual Plus/1,2 GHz, 8 GB eMMC Flash, 1 GB DDR3L, 64 kB EEPROM, -25°C…+85°

    TQMa8XQPS-AA (Prototypes Q3/18)
    i.MX8X Quad Plus/1,2 GHz, 8 GB eMMC Flash, 1 GB DDR3L, 64 kB EEPROM, -25°C…+85°

    STKa8XxS-AA (Prototypes Q3/18)
    STKa8XxS (Eval Kit) with TQMa8XxS-AA, i.MX8Xx / 1,2 GHz, 1 GB DDR3L, 8GB eMMC Flash, 64kB EEPROM, 3x RS232, 2 x CAN FD separated, 1x USB 3.0 OTG, 1x USB 3.0 HOST, 1x USB 2.0 HOST, 2x ETH 10/100/1000, 1x Display Port, 2x LVDS/DSI, 1x PCIe, Audio, RTC, Temperature sensor, Reset-Button, SD interface, Power Supply, 4GB SD card, Cables

    Other variants on request

  • Extended benefits

    At TQ you not only get first-class embedded systems - we also provide a series of benefits around the embedded module:
    We support you in defining your requirements for your project. The technical specification serves as guideline for all persons that are involved in the development process. For a fast and easy starting-up we provide starter kits. Through the plug-and-play principle, the software evaluation can be started, if the actual target hardware is not yet available. Due to this a product can be launched faster, reasonably priced and more safely.
    We support you concerning the selection of components as well as Obsolescence management. Thus your products are protected against obsolete components, complex redesigns, doubtful sources and cost-intensive brokerwares.
    If desired we arrange a circuit diagram review for your baseboard directly by the developer of the module. Due to the longtime experience of our developers, it happens quite often that entrapments are indentified in the course of the review.Supply of Software, especially Board Support Packages and hardware-close driver for the required operating system. Therefore you shorten your development time and reduce your costs.
    Starting-up of your baseboard. In case that the starting-up of your baseboard with our module does not work at once, we support you by a structural fault analysis in order to quickly find the reason and repair it. We provide you with reference notes to power-on's e.g. power-on of a CAN controller to the local bus, as well as with application notes.Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase.
    As system service provider TQ is able to take over the development, production and test of your baseboard. Therefore you get the whole tested unit from one hand. Please just ask us. We are pleased to consult you!

  • Support

    Scope of support: Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase. Read more about the >>> scope of support. Downloads: The latest documentation like product data sheets, manuals, application notes or software and driver are available in the „Downloads“ section on this page. Support Wiki: Extensive software information like BSP documentation, FAQs, application notes, example codes and tips & tricks are available in the >>> TQMa6x Support Wiki. Contact: We are pleased to answer further questions. Please use our >>> support form to contact us.


Our Field Application Engineers offer support during all phases of a project, from consulting and design-in to after-sales assistance. Current data sheets and product catalogs can be found in our Download Center.


__Umfangreiche Informationen aus dem Softwarebereich wie Beispielcodes, Tipps und Tricks, Anwendungshinweise, FAQs sowie Bsp.-Dokumentationen stehen Ihnen in unserem Support Wiki zur Verfügung.

TQ - Technology in Quality

TQ stands for technology with highest quality standards. For us this name represents a challenge which we do our best to meet at every single step of the process – from the original idea right through to the finished product. We see ourselves in this context as partners for our customers and support them in the pursuit of their strategic objectives. As a corporate group we cover the whole bandwidth of this comprehensive product and service spectrum and we can thus meet the special wishes of all our customers with great flexibility. TQ – your reliable partner for the whole world of electronics.

  • TQ offers the complete range of services - from concept to finished product.
  • All services are available on a modular basis or as a complete package - highly customized.
  • Our product range covers various areas such as drive motors as well as minimodules.
  • Embedded modules enable cost-efficient and timesaving solutions to keep up with today’s rapidly developing high technology market.