The Minimodule TQMa6x, based on the processor MCIMX6 from NXP, combines Industry and Multimedia. The integrated graphic controller supports displays with a resolution up to Full HD. Therefore the module is best suited for HMI and animated display screen- and accordingly multitouch applications. With an ARM Cortex™ A9 core and a clock rate up to 4 x 1,2 GHz the TQMa6x provides a balanced ratio between performance and power dissipation. Note about the ordering information: Further variants are available on request.
Up to 1,2 GHz
NXP MCIMX6 Solo/Dual Light/Dual/Quad Cortex A9
1x USB 2.0 High-Speed Host | 1x USB 2.0 High-Speed OTG | Up to 2x USB High-Speed Inter-Chip (HSIC)
Up to 2x
Up to 5x CSPI
Up to 5x
SSI / I²S:
Up to 3x
1x 10/100/1000 Mbit (IEEE 1588)
Other interfaces & busses
CPU JTAG Interface
0 / 64 kbit
Up to 16 GByte
Up to 128 MB
Up to 2 GB | MCIMX6 Solo with 1 GB
Temperature range, extended:
-40°C ... +85°C
2x 16-Bit Camera Interface
-25°C ... +85°C
DVI (HDMI) | Parallel 2x 24-Bit (RGB) | Dual LVDS
Operating systems / User interfaces
Operating systems on request:
Windows Embedded 7, Android
Linux, VxWorks, QNX
for Embedded module TQMa6x
for Embedded module TQMa6x
i.MX6S, Solo Cortex A9/800 MHz, 8 GB eMMC flash, 512 MB DDRL3, 64-kbit EEPROM, -25°C…+85°C
i.MX6U, Dual Lite ARM® Cortex A9/800 MHz, 8 GB eMMC Flash, 1 GB DDR3L, 64 kB EEPROM, -25°C...+85°C
i.MX6D, Dual Cortex A9/800 MHz, 8 GB eMMC flash, 1 GB DDRL3, 64-kbit EEPROM, -25°C…+85°C
i.MX6DP, Dual Plus Cortex A9 / 800 MHz, 8GB eMMC Flash,1GB DDR3L, 64kB EEPROM, -25°C…+85°C
i.MX6QP, Quad Plus Cortex A9 / 800 MHz, 8GB eMMC Flash,1GB DDR3L, 64kB EEPROM, -25°C…+85°C
i.MX6Q, Quad Cortex A9/800 MHz, 8 GB eMMC flash, 1 GB DDRL3, 64-kbit EEPROM, -25°C…+85°C
Further variants with SPI NOR and extended temperature range (-40°C…+85°C) are available as a standard.
Other configurations on request
Scope of support: Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase. Read more about the >>> scope of support. Downloads: The latest documentation like product data sheets, manuals, application notes or software and driver are available in the „Downloads“ section on this page. Support Wiki: Extensive software information like BSP documentation, FAQs, application notes, example codes and tips & tricks are available in the >>> TQMa6x Support Wiki. Contact: We are pleased to answer further questions. Please use our >>> support form to contact us.
At TQ you not only get first-class embedded systems - we also provide a series of benefits around the embedded module: We support you in defining your requirements for your project. The technical specification serves as guideline for all persons that are involved in the development process. For a fast and easy starting-up we provide starter kits. Through the plug-and-play principle, the software evaluation can be started, if the actual target hardware is not yet available. Due to this a product can be launched faster, reasonably priced and more safely. We support you concerning the selection of components as well as Obsolescence management. Thus your products are protected against obsolete components, complex redesigns, doubtful sources and cost-intensive brokerwares. If desired we arrange a circuit diagram review for your baseboard directly by the developer of the module. Due to the longtime experience of our developers, it happens quite often that entrapments are indentified in the course of the review.Supply of Software, especially Board Support Packages and hardware-close driver for the required operating system. Therefore you shorten your development time and reduce your costs. Starting-up of your baseboard. In case that the starting-up of your baseboard with our module does not work at once, we support you by a structural fault analysis in order to quickly find the reason and repair it. We provide you with reference notes to power-on's e.g. power-on of a CAN controller to the local bus, as well as with application notes.Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase. As system service provider TQ is able to take over the development, production and test of your baseboard. Therefore you get the whole tested unit from one hand. Please just ask us. We are pleased to consult you!
Our Field Application Engineers offer support during all phases of a project, from consulting and design-in to after-sales assistance. Current data sheets and product catalogs can be found in our Download Center.
TQ - Technology in Quality
TQ stands for technology with highest quality standards. For us this name represents a challenge which we do our best to meet at every single step of the process – from the original idea right through to the finished product. We see ourselves in this context as partners for our customers and support them in the pursuit of their strategic objectives. As a corporate group we cover the whole bandwidth of this comprehensive product and service spectrum and we can thus meet the special wishes of all our customers with great flexibility. TQ – your reliable partner for the whole world of electronics.
- TQ offers the complete range of services - from concept to finished product.
- All services are available on a modular basis or as a complete package - highly customized.
- Our product range covers various areas such as drive motors as well as minimodules.
- Embedded modules enable cost-efficient and timesaving solutions to keep up with today’s rapidly developing high technology market.