Please update ur browser to surf this page

Embedded module TQMa335xL

with Sitara™ AM335x

ARM Cortex-A8 module with Sitara™ AM335x from Texas Instruments.

Embedded module TQMa335xL

  • Real-time communications Subsystem
  • Recommended for high quantity use
  • Low-cost due to highest level of integration
  • Extended temperature range
  • 2x IEEE1588 Ethernet (L2 Switch)
  • Low power consumption (typ. 2 W)
  • Long-term availability

  • Base


    The TQMa335xL Minimodule is the TQMa335x variant without connector and is directly soldered with the baseboard. The basis for this is a ARM ® Cortex™-A8 core with up to 1 GHz. The LGA module has been developed especially for the use in high volume projects. The realised memory on the module provides best system support. The module is best suited for visualization and control applications with real time demands. A large number of interfaces and module functions are implemented in the CPU due to the high level of interface and function integration. This allows the basic board to be developed easily and at low-cost. All the processor’s functional pins are on the LGA pins. Note about the ordering information: Further variants are available on request.

  • Detail



    Real Time Clock (RTC):



    24-Bit TFT Interface

    Operating systems / User interfaces

    Operating systems on request:

    VxWorks, Android

    Operating systems:

    Linux, QNX, Windows Embedded Compact 2013



    Up to 512 MB

    e-MMC Flash:

    Up to 16 GB

    System interfaces


    Up to 2x (4ch)


    2x USB 2.0 high speed OTG interface


    Up to 2x CAN 2.0B

    Ethernet 1000BaseT:

    Up to 2x Ethernet 10/100/1000 Mbit (L2 Switch)


    Up to 3x


    Up to 2x


    Up to 6x



    AM3352, AM3354, AM3358, AM3359 (Up to 1 GHz)

    CPU frequency:

    Up to 1 GHz

    Other interfaces & busses


    CPU JTAG Interface




    Up to 8x 12-Bit


    Up to 3x



    38 mm x 38 mm

    Temperature range, extended:

    -40°C ... +85°C



    Temperature range:

    -25°C ... +85°C

    Temperature sensor:



    In production



    Power supply:

    3,3 V

    System connector:

    LGA (Land Grid Array) 209 pins

  • Downloads

    for Embedded module TQMa335xL

  • Starterkits

    for Embedded module TQMa335xL

    • Ordering


      TQMa3352L-AA (auf Anfrage, ab 10.000 Stück)
      AM3352@ 800 MHz, 256 MB DDR3L, 4 GB e-MMC Flash, -25°C…+85°C

      AM3354 / 800MHz, 4GB eMMC Flash, 256MB DDR3L, -25°C- +85°C

      Other configurations on request

      STKa335 (Eval Kit) with TQMa3359-AA, AM3359 / 800 MHz, 256 MB DDR3, 4 GB e-MMC Flash, 64 kbit EEPROM, 1x RS232, 1x RS485, 2x CAN 2.0B gtr., 1x USB 2.0 HOST, 1 x USB 2.0 OTG, 2x ETH 10/100/1000 (1x EtherCat), Stereo Out, Mono Mic In, RTC, Temperature sensor, Reset button, SD interface, Power Supply, 4 GB SD card, Cables

    • Extended benefits

      At TQ you not only get first-class embedded systems - we also provide a series of benefits around the embedded module:
      We support you in defining your requirements for your project. The technical specification serves as guideline for all persons that are involved in the development process. For a fast and easy starting-up we provide starter kits. Through the plug-and-play principle, the software evaluation can be started, if the actual target hardware is not yet available. Due to this a product can be launched faster, reasonably priced and more safely.
      We support you concerning the selection of components as well as Obsolescence management. Thus your products are protected against obsolete components, complex redesigns, doubtful sources and cost-intensive brokerwares.
      If desired we arrange a circuit diagram review for your baseboard directly by the developer of the module. Due to the longtime experience of our developers, it happens quite often that entrapments are indentified in the course of the review.Supply of Software, especially Board Support Packages and hardware-close driver for the required operating system. Therefore you shorten your development time and reduce your costs.
      Starting-up of your baseboard. In case that the starting-up of your baseboard with our module does not work at once, we support you by a structural fault analysis in order to quickly find the reason and repair it. We provide you with reference notes to power-on's e.g. power-on of a CAN controller to the local bus, as well as with application notes.Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase.
      As system service provider TQ is able to take over the development, production and test of your baseboard. Therefore you get the whole tested unit from one hand. Please just ask us. We are pleased to consult you!


    Our Field Application Engineers offer support during all phases of a project, from consulting and design-in to after-sales assistance. Current data sheets and product catalogs can be found in our Download Center.


    In our Support-Wiki, you can find extensive information about software, tipps and applications as well as product documentation.