Error

Please update ur browser to surf this page

Embedded module TQMa335x

with Sitara™ AM335x

ARM Cortex-A8 module with Sitara™ AM335x from Texas Instruments.

  • Real-time communications subsystem
  • Low-cost due to highest level of integration
  • Extended temperature range
  • 2x IEEE1588 Ethernet (L2 Switch)
  • Low power consumption (typ. 2 W)
  • Long-term availability

  • Base

    Information

    The TQMa335x Minimodule, based on the AM335x processor, offers a balanced ratio between computing and graphic performance. The basis for this is a ARM® Cortex™-A8 core with up to 1 GHz. The realised memory on the module provides best system support. The module is best suited for visualization and control applications with real time demands. A large number of interfaces and module functions are implemented in the CPU due to the high level of interface and function integration. This allows the basic board to be developed easily and at low-cost. All the processor’s functional pins are on the module plug-in connector. Note about the ordering information: Further variants are available on request.

  • Detail

    specification

    Microprocessor

    Microprocessor:

    AM3352, AM3354, AM3358, AM3359

    CPU frequency:

    Up to 1 GHz

    System interfaces

    SPI:

    Up to 2x

    UART:

    Up to 6x

    McASP:

    Up to 2x (4ch)

    USB:

    2x USB 2.0 High-Speed On-the-Go Geräte interface

    CAN:

    Up to 2x CAN 2.0B

    Ethernet 1000BaseT:

    Up to 2x (L2 Switch)

    I²C:

    Up to 3x

    Operating systems / User interfaces

    Operating systems:

    Linux, QNX, Windows Embedded Compact 2013

    Operating systems on request:

    VxWorks, Android

    General

    Power supply:

    3,3 V

    Temperature range:

    -25°C ... +85°C

    System connector:

    Board-to-Board plug-in system (2 x 120 pins)

    Temperature range, extended:

    -40°C ... +85°C

    RoHS:

    Yes

    RTC:

    Yes

    Temperature sensor:

    Yes

    Availability:

    In Production

    Plug system:

    0.8mm

    Memory

    NOR-Flash:

    Up to 128 MB

    DDR3L-SDRAM:

    Up to 512 MB

    e-MMC Flash:

    Up to 16 GB

    EEPROM:

    0 / 64 kbit

    Graphics

    TFT:

    24-Bit TFT Interface

    Other interfaces & busses

    ADC:

    Up to 8x 12-Bit

    PWM:

    Up to 3x

    Debugging:

    CPU JTAG Interface

    GPIO:

    Yes

  • Downloads

    for Embedded module TQMa335x

  • Starterkits

    for Embedded module TQMa335x

    • Ordering

      Information

      TQMa3352-AA
      AM3352 / 800MHz, 256MB DDR3L, 4GB eMMC Flash, 64kB EEPROM, Extended temperature range from -25°C…+85°C

      TQMa3354-AA
      AM3354 / 800MHz, 256MB DDR3L, 4GB eMMC Flash, 64kB EEPROM, Extended temperature range from -25°C…+85°C

      TQMa3359-AA
      AM3359 / 800MHz, 256MB DDR3L, 4GB eMMC Flash, 64kB EEPROM, Extended temperature range from -25°C…+85°C

      Other variants on request

    • Extended benefits

      At TQ you not only get first-class embedded systems - we also provide a series of benefits around the embedded module:
      We support you in defining your requirements for your project. The technical specification serves as guideline for all persons that are involved in the development process. For a fast and easy starting-up we provide starter kits. Through the plug-and-play principle, the software evaluation can be started, if the actual target hardware is not yet available. Due to this a product can be launched faster, reasonably priced and more safely.
      We support you concerning the selection of components as well as Obsolescence management. Thus your products are protected against obsolete components, complex redesigns, doubtful sources and cost-intensive brokerwares.
      If desired we arrange a circuit diagram review for your baseboard directly by the developer of the module. Due to the longtime experience of our developers, it happens quite often that entrapments are indentified in the course of the review.Supply of Software, especially Board Support Packages and hardware-close driver for the required operating system. Therefore you shorten your development time and reduce your costs.
      Starting-up of your baseboard. In case that the starting-up of your baseboard with our module does not work at once, we support you by a structural fault analysis in order to quickly find the reason and repair it. We provide you with reference notes to power-on's e.g. power-on of a CAN controller to the local bus, as well as with application notes.Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase.
      As system service provider TQ is able to take over the development, production and test of your baseboard. Therefore you get the whole tested unit from one hand. Please just ask us. We are pleased to consult you!

    • Support

      Scope of support: Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase. Read more about the >>> scope of support. Downloads: The latest documentation like product data sheets, manuals, application notes or software and driver are available in the „Downloads“ section on this page. Support Wiki: Extensive software information like BSP documentation, FAQs, application notes, example codes and tips & tricks are available in the >>> TQMa335x Support Wiki. Contact: We are pleased to answer further questions. Please use our >>> support form to contact us.

    Support

    Our Field Application Engineers offer support during all phases of a project, from consulting and design-in to after-sales assistance. Current data sheets and product catalogs can be found in our Download Center.

    Support-Wiki

    In our Support-Wiki, you can find extensive information about software, tipps and applications as well as product documentation.

    TQ - Technology in Quality

    TQ stands for technology with highest quality standards. For us this name represents a challenge which we do our best to meet at every single step of the process – from the original idea right through to the finished product. We see ourselves in this context as partners for our customers and support them in the pursuit of their strategic objectives. As a corporate group we cover the whole bandwidth of this comprehensive product and service spectrum and we can thus meet the special wishes of all our customers with great flexibility. TQ – your reliable partner for the whole world of electronics.

    • TQ offers the complete range of services - from concept to finished product.
    • All services are available on a modular basis or as a complete package - highly customized.
    • Our product range covers various areas such as drive motors as well as minimodules.
    • Embedded modules enable cost-efficient and timesaving solutions to keep up with today’s rapidly developing high technology market.