Error

Please update ur browser to surf this page

Embedded module TQMa28L

with ARM9 based on i.MX28

ARM9 module with i.MX28 from NXP

  • Smallest ARM9 module
  • High quantity use
  • 2x IEEE1588 Ethernet (L2 Switch)
  • Extended temperature range
  • Low power consumption (typ. 1 W)
  • Long-term availability
  • Power management
  • Battery charge functionality
  • IEC 61850 stack

  • Base

    Information

    The TQMa28L Minimodule, is the TQMa28 variant without connector and is directly soldered with the baseboard. The BGA module has been developed especially for the use in high volume projects. Due to the high level of integration it is extremely space- and cost-saving. This enables an easy and cost-effective baseboard development. The BGA module is based on the i.MX28 with an ARM926 core with up to 454 MHz. The module is best suited for smart metering and for easy visualization and control applications. The module is Software compatible to the TQMa28. All the processor’s functional pins are on the BGA pins. Note about the ordering information: Further variants are available on request.

  • Detail

    specification

    Microprocessor

    Microprocessor:

    NXP i.MX283, i.MX287 (ARM9 Architecture)

    CPU frequency:

    Up to 454 MHz

    System interfaces

    USB:

    1x USB 2.0 High-Speed On-the-Go System interface | 1x USB 2.0 High-Speed HOST interface

    CAN:

    Up to 2x CAN 2.0B

    Ethernet 10/100BaseT:

    Up to 2x

    I²C:

    Up to 2x

    SPI:

    Up to 2x

    UART:

    Up to 5x

    SSI / I²S:

    Up to 2x

    Other interfaces & busses

    Debugging:

    CPU JTAG Interface

    ADC:

    Up to 8x 12-Bit

    PWM:

    Up to 8x

    GPIO:

    Yes

    General

    Dimensions:

    30mm x 30mm

    Temperature range, extended:

    -25°C ... +85°C

    RoHS:

    Yes

    RTC:

    Yes

    Power supply:

    5 V

    Temperature range:

    0°C ... +70°C

    Availability:

    On request

    System connector:

    LGA (Land Grid Array) 191 Pins

    Memory

    DDR1-SDRAM:

    Up to 128 MByte

    e-MMC Flash:

    Up to 16 GB

    Operating systems / User interfaces

    Operating systems on request:

    VxWorks

    Supported software:

    IEC 61850 stack

    Operating systems:

    Linux, WinCE 6.0, QNX

    Visualisation:

    Qt

    Graphic

    TFT:

    24 bit TFT Interface

  • Downloads

    for Embedded module TQMa28L

  • Starterkits

    for Embedded module TQMa28L

  • Information on the

    Orders

    TQMa28L-AB (on request, > 10,000 pieces)
    i.MX283 / 450 MHz, 128MB DDR2, 4 GB eMMC Flash, Extended temperature range from -25°C...+85°C

    TQMa28L-AA (on request, > 10,000 pieces)
    i.MX287 / 450 MHz, 128MB DDR2, 4 GB eMMC Flash, Extended temperature range from -25°C...+85°C

    Other variants on request

     

  • Extended benefits

    At TQ you not only get first-class embedded systems - we also provide a series of benefits around the embedded module:
    We support you in defining your requirements for your project. The technical specification serves as guideline for all persons that are involved in the development process. For a fast and easy starting-up we provide starter kits. Through the plug-and-play principle, the software evaluation can be started, if the actual target hardware is not yet available. Due to this a product can be launched faster, reasonably priced and more safely.
    We support you concerning the selection of components as well as Obsolescence management. Thus your products are protected against obsolete components, complex redesigns, doubtful sources and cost-intensive brokerwares.
    If desired we arrange a circuit diagram review for your baseboard directly by the developer of the module. Due to the longtime experience of our developers, it happens quite often that entrapments are indentified in the course of the review.Supply of Software, especially Board Support Packages and hardware-close driver for the required operating system. Therefore you shorten your development time and reduce your costs.
    Starting-up of your baseboard. In case that the starting-up of your baseboard with our module does not work at once, we support you by a structural fault analysis in order to quickly find the reason and repair it. We provide you with reference notes to power-on's e.g. power-on of a CAN controller to the local bus, as well as with application notes.Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase.
    As system service provider TQ is able to take over the development, production and test of your baseboard. Therefore you get the whole tested unit from one hand. Please just ask us. We are pleased to consult you!

  • Support

    Scope of support: Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase. Read more about the >>> scope of support. Downloads: The latest documentation like product data sheets, manuals, application notes or software and driver are available in the „Downloads“ section on this page. Contact: We are pleased to answer further questions. Please use our >>> support form to contact us.

__Support-Umfang

__Unsere Field Application Engineers stehen Ihnen vor, während und nach Ihrer Design-Phase zur Seite. Aktuelle Downloads wie Produktdatenblätter, Manuals, Application Notes sowie Software und Treiber finden Sie im Downloadcenter.

__Support-Wiki

__Umfangreiche Informationen aus dem Softwarebereich wie Beispielcodes, Tipps und Tricks, Anwendungshinweise, FAQs sowie Bsp.-Dokumentationen stehen Ihnen in unserem Support Wiki zur Verfügung.

Mit TQ zum Erfolg

Von der Idee bis zur Serienreife entwickelt und produziert TQ elektronische Leiterplatten, Baugruppen und Geräte nach kundenspezifischen Anforderungen (E²MS). Das Dienstleistungsspektrum reicht von Anwendungen im Bereich der Industrieelektronik über Medizintechnik, Automatisierungstechnik und Messtechnik bis hin zur Verkehrs- und Transporttechnik.

  • Langjährige Erfahrung und Know-How
  • Zertifiziertes Support-Team
  • Obsolescence Management
  • Partnerschaftliche Zusammenarbeit
  • Termintreue und Liefersicherheit
  • Qualitätskontrolle durch Zertifizierungen