Embedded module TQMT1040
with QorIQ™ T1 processor
Power Architecture module with QorIQ™ T1040 processor from NXP.
- Quad core up to 1400 MHz in 28 nm SOI for the best Performance/Watt ratio
- High speed communication with a combination of up to 4x Gigabit Ethernet and integrated 8-Port Switch, 4x PCle and two USB 2.0 interfaces
- Dual SATA interfaces for data storage
- Easy function extensions via PCle, eSPI, I²C and IFC (Local Bus)
- IEEE 1588 time synchronization in hardware
- Extremely compact module dimensions
- Display Interface Unit
The TQMT1040 embedded module embodies the next generation of the well-known TQMP1020/2020 QorIQ™ product family. The QorIQ™ T1 processor family inaugurates new applications in industry and communications. With four e5500 (64-bit) cores and a clock rate of up to 4x 1400 MHz, the TQ modules using QorIQ™ processors provide the best ratio between processing speed and power loss. The 28 nm technology significantly reduces the power consumption compared to a QorIQ™ module of the former generation. This feature, together with the expanded temperature range and intelligent power management, enables the use in fan-free systems. The TQMT1040 is best suited for telecommunication applications that demand high availability, outdoor ambient temperatures and small overall size.
Operating systems / User interfaces
Operating systems on request:
PikeOS, Wind River Linux, VxWorks
typ. 7 up to 9 W
0°C ... +70°C
74mm x 54mm
Temperature range, extended:
-40°C ... +85°C
Other interfaces & busses
JTAG Interface | Real-Time Debug Interface (Aurora)
4x | 2.0 controller up to 5.0 Gbit/s according to PCI Express specification 2.0 as Root-Complex or Endpoint
Up to 32
1x | unterstützt das Booten von der Flash-Karte
Up to 8 GB, up to 4 GB for extended temperature range (-40°C …+85°C)
Up to 8 GB (optional)
Up to 256 MB
4x (with IEEE1588v2 support) | integrated 8-Port Switch
2x DUART, max. 115 kBaud
2x SATA 2.0
2x USB 2.0 High Speed Host / Device / OTG
4x, max. 400 kHz
1x eSPI controller
typ. 7 up to 9 W
LCD / TFT:
Display controller for TFT LCD displays (up to 24-Bit RGB)
Quad T1040 Power Architecture™ e5500 Cores (64-Bit)
Up to 1400 MHz
for Embedded module TQMT1040
for Embedded module TQMT1040
TQ Minimodule with T1040 Quad-Core CPU with up to 4x 1200 MHz, Crypto, 2GB DDR3L SDRAM, 128 MB NOR flash, 32 KByte EEPROM, -40°C ... +85°C
At TQ you not only get first-class embedded systems - we also provide a series of benefits around the embedded module: We support you in defining your requirements for your project. The technical specification serves as guideline for all persons that are involved in the development process. For a fast and easy starting-up we provide starter kits. Through the plug-and-play principle, the software evaluation can be started, if the actual target hardware is not yet available. Due to this a product can be launched faster, reasonably priced and more safely. We support you concerning the selection of components as well as Obsolescence management. Thus your products are protected against obsolete components, complex redesigns, doubtful sources and cost-intensive brokerwares. If desired we arrange a circuit diagram review for your baseboard directly by the developer of the module. Due to the longtime experience of our developers, it happens quite often that entrapments are indentified in the course of the review.Supply of Software, especially Board Support Packages and hardware-close driver for the required operating system. Therefore you shorten your development time and reduce your costs. Starting-up of your baseboard. In case that the starting-up of your baseboard with our module does not work at once, we support you by a structural fault analysis in order to quickly find the reason and repair it. We provide you with reference notes to power-on's e.g. power-on of a CAN controller to the local bus, as well as with application notes.Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase. As system service provider TQ is able to take over the development, production and test of your baseboard. Therefore you get the whole tested unit from one hand. Please just ask us. We are pleased to consult you!
Our Field Application Engineers offer support during all phases of a project, from consulting and design-in to after-sales assistance. Current data sheets and product catalogs can be found in our Download Center.
TQ - Technology in Quality
TQ stands for technology with highest quality standards. For us this name represents a challenge which we do our best to meet at every single step of the process – from the original idea right through to the finished product. We see ourselves in this context as partners for our customers and support them in the pursuit of their strategic objectives. As a corporate group we cover the whole bandwidth of this comprehensive product and service spectrum and we can thus meet the special wishes of all our customers with great flexibility. TQ – your reliable partner for the whole world of electronics.
- TQ offers the complete range of services - from concept to finished product.
- All services are available on a modular basis or as a complete package - highly customized.
- Our product range covers various areas such as drive motors as well as minimodules.
- Embedded modules enable cost-efficient and timesaving solutions to keep up with today’s rapidly developing high technology market.