Error

Please update ur browser to surf this page

Embedded module TQMLS102xA

with Layerscape LS102xA

ARM Dual Cortex™-A7 module with LS102xA from NXP.

Embedded module TQMLS102xA

  • Graphics
  • Extended temperature range
  • High-Speed communication via 3x Gigabit Ethernet, 2x PCle and 1x USB 3.0 interface
  • Low power consumption (typ. 3 W)
  • QorIQ Trust Architecture and ARM TrustZone
  • IEEE 1588 support
  • Security functions and QUICC Engine

  • Base

    Information

    The Embedded module TQMLS102xA, based on the processor LS102xA from NXP, combines the ARM Core Architecture with the QorIQ high speed communication technology. The integrated graphics controller supports applications with display and touch screen requirements. For various applications such as networking, industrial automation and controls with requirements for fast and secure data processing, there are optimized CPU variants available. With a Dual-Core ARM Cortex™ A7 core and a clock rate up to 2 x 1,0 GHz the TQMLS102xA provides a balanced ratio between high performance and power dissipation. Note about the ordering information: Further variants are available on request.

  • Detail

    specification

    Microprocessor

    Microprocessor:

    QorIQ LS1020A, LS1021A, LS1022A (ARM Cortex™-A7)

    CPU frequency:

    Up to 1,0 GHz

    Graphics

    Graphic interfaces:

    LCD (only LS1021A)

    Memory

    NOR-Flash:

    Up to 512 MB Quad SPI NOR

    ECC Protection:

    Yes (only LS1020A, LS1021A)

    EEPROM:

    0 / 64 kbit

    DDR3L-SDRAM:

    Up to 2 GB

    e-MMC Flash:

    Up to 16 GB

    Operating systems / User interfaces

    Operating systems:

    Linux

    Operating systems on request:

    VxWorks, QNX, PikeOS

    General

    Power supply:

    3,3 V | Voltage monitoring (optional)

    Temperature sensor:

    Yes

    Availability:

    Series

    Plug system:

    0.8 mm

    Pin number:

    280

    Temperature range, extended:

    -40°C ... +85°C

    RoHS:

    Yes

    RTC:

    Yes

    Power management:

    Extended power management (optional)

    System interfaces

    SSI / I²S:

    Up to 4x

    USB:

    Up to 1x USB 3.0 High-Speed Host | Up to 1x USB 2.0 High-Speed OTG

    I²C:

    Up to 3x

    SPDIF:

    Yes

    Ethernet:

    Up to 3x 10/100/1000 Mbit (IEEE 1588)

    SATA:

    Up to 1x SATA 3.0

    CAN:

    Up to 4x FlexCAN

    SPI:

    Up to 2x

    UART:

    Up to 6x

    Other interfaces & busses

    Debugging:

    CPU JTAG interface

    PCIe:

    Up to 2x

  • Downloads

    for Embedded module TQMLS102xA

  • Starterkits

    for Embedded module TQMLS102xA

    • Ordering

      Information

      TQMLS1020A-AA
      LS1020A, 1GHz, 64 MB NOR Flash, 1 GB DDR3L, 64kB EEPROM, RTC, -40°C...+85°C

      TQMLS1021A-AA
      LS1021A, 1GHz, 64 MB NOR Flash, 1 GB DDR3L, 64kB EEPROM, RTC,-40°C...+85°C

      TQMLS1022A-AA
      TQMLS1022A, Dual Cortex™-A7 / 600MHz, 64 MB NOR Flash, 512 MB DDR3L, 64kB EEPROM, -40°C...+85°C

      Other variants on request

       

    • Support

      Support-Umfang: Unsere Field Application Engineers stehen Ihnen vor, während und nach Ihrer Designphase mit Rat und Tat zur Seite. Lesen Sie mehr zum >>> Umfang des Support-Angebots. Downloads: Aktuelle Downloads wie Produktdatenblätter, Manuals, Application notes oder Software und Treiber finden Sie auf dieser Seite im Bereich "Downloads". Support-Wiki: Umfangreiche Informationen aus dem Softwarebereich wie BSP-Dokumentationen, FAQs, Anwendungshinweise, Beispielcodes und Tipps & Tricks stehen Ihnen in unserem >>> TQMLS102xA Support Wiki zur Verfügung. Kontakt: Weitergehende Fragen beantworten wir Ihnen gerne. Bitte kontaktieren Sie uns dazu über unser >>> Supportformular.

    • Extended benefits

      At TQ you not only get first-class embedded systems - we also provide a series of benefits around the embedded module:
      We support you in defining your requirements for your project. The technical specification serves as guideline for all persons that are involved in the development process. For a fast and easy starting-up we provide starter kits. Through the plug-and-play principle, the software evaluation can be started, if the actual target hardware is not yet available. Due to this a product can be launched faster, reasonably priced and more safely.
      We support you concerning the selection of components as well as Obsolescence management. Thus your products are protected against obsolete components, complex redesigns, doubtful sources and cost-intensive brokerwares.
      If desired we arrange a circuit diagram review for your baseboard directly by the developer of the module. Due to the longtime experience of our developers, it happens quite often that entrapments are indentified in the course of the review.Supply of Software, especially Board Support Packages and hardware-close driver for the required operating system. Therefore you shorten your development time and reduce your costs.
      Starting-up of your baseboard. In case that the starting-up of your baseboard with our module does not work at once, we support you by a structural fault analysis in order to quickly find the reason and repair it. We provide you with reference notes to power-on's e.g. power-on of a CAN controller to the local bus, as well as with application notes.Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase.
      As system service provider TQ is able to take over the development, production and test of your baseboard. Therefore you get the whole tested unit from one hand. Please just ask us. We are pleased to consult you!

    Support

    Our Field Application Engineers offer support during all phases of a project, from consulting and design-in to after-sales assistance. Current data sheets and product catalogs can be found in our Download Center.

    Support-Wiki

    In our Support-Wiki, you can find extensive information about software, tipps and applications as well as product documentation.

    TQ - Technology in Quality

    TQ stands for technology with highest quality standards. For us this name represents a challenge which we do our best to meet at every single step of the process – from the original idea right through to the finished product. We see ourselves in this context as partners for our customers and support them in the pursuit of their strategic objectives. As a corporate group we cover the whole bandwidth of this comprehensive product and service spectrum and we can thus meet the special wishes of all our customers with great flexibility. TQ – your reliable partner for the whole world of electronics.

    • TQ offers the complete range of services - from concept to finished product.
    • All services are available on a modular basis or as a complete package - highly customized.
    • Our product range covers various areas such as drive motors as well as minimodules.
    • Embedded modules enable cost-efficient and timesaving solutions to keep up with today’s rapidly developing high technology market.