Please update ur browser to surf this page

Embedded module TQMLS1012AL

with Layerscape LS1012A

ARM Cortex™-A53 module with LS1012A from NXP.

  • Extended temperature range
  • High-Speed communication via 2x Gigabit Ethernet, 1x PCle, 1x USB 3.0 and 1x SATA 3.0 interface
  • Low power consumption (typ. 1-2 W)
  • QorIQ Trust Architecture and ARM TrustZone
  • Packet Acceleration Engine

  • Base


    The Minimodule TQMLS1012AL, based on the processor LS1012A from NXP, combines the 64Bit ARM Core architecture with the QorIQ high speed communication technology. This module is for various applications such as networking, industrial automation, gateways and controls with requirements for trusted, fast and secure data processing. The 800MHz ARM Cortex™ A53 core integrated with high-speed peripherals and hardware acceleration provide the TQMLS1012AL a balance of high performance and low power.

  • Detail


    Operating systems / User interfaces

    Operating systems:


    Operating systems on request:



    Power supply:

    5 V | Voltage monitoring (optional)

    Temperature sensor:




    Power management:

    Extended power management (optional)

    Plug system:

    LGA (Land Grid Array)

    Pin number:



    31mm x 31mm (TBD)

    Temperature range, extended:

    -40°C ... +85°C





    System interfaces

    SSI / I²S:

    Up to 5x




    Up to 2x 10/100/1000 Mbit (IEEE 1588)


    Up to 1x SATA 3.0


    1x USB 2.0 high speed w/ULPI | 1x USB 3.0 high speed w/PHY


    Up to 2x


    Up to 1x


    Up to 2x



    Up to 1 QSPI


    Up to 1 GB


    0 / 64 kbit



    QorIQ LS1012A (ARM Cortex™-A53)

    CPU frequency:

    Up to 1,0 GHz

    Other interfaces & busses


    Up to 1x


    CPU JTAG interface

  • Downloads

    for Embedded module TQMLS1012AL

  • Starterkits

    for Embedded module TQMLS1012AL

  • Information on the


    TQMLS1012AL-AA (Prototypes Q4/17)
    TQMLS1012A, Cortex A53 / 1 GHz, 64 MB Q-SPI NOR Flash, 256 MB DDR3L, 64kB EEPROM, RTC, -40°C …+85°C

    STKLS1012AL-AA (Prototypes Q2/18)
    STKLS1012AL-AA, TQMLS1012A, Cortex A53/1 GHz, 64 MB Q-SPI NOR Flash, 512 MB DDR3L,
    64 kB EEPROM, 0°C…+70°C, 2x USB 3.0, 5x ETH 10/100/1000, 2x Mini PCIe (1x only USB, SIM-Card),
    1x SATA M.2, USB –Debug Interface, JTAG RTC, Temperature sensor, Reset-Button, SD-Card interface,
    Power Supply, 4 GB SD card, Cables

    The core of the STKLS1012AL set is the TQMLS1012AL module with Cortex-A53 CPU. The components
    contained in the starter kit constitute a modular system enabling you to develop your own product
    ideas. To develop your own hardware you can use the certified and qualified circuit components of thestarter
    kit in your own designs.

    Other configurations on request


  • Extended benefits

    At TQ you not only get first-class embedded systems - we also provide a series of benefits around the embedded module:
    We support you in defining your requirements for your project. The technical specification serves as guideline for all persons that are involved in the development process. For a fast and easy starting-up we provide starter kits. Through the plug-and-play principle, the software evaluation can be started, if the actual target hardware is not yet available. Due to this a product can be launched faster, reasonably priced and more safely.
    We support you concerning the selection of components as well as Obsolescence management. Thus your products are protected against obsolete components, complex redesigns, doubtful sources and cost-intensive brokerwares.
    If desired we arrange a circuit diagram review for your baseboard directly by the developer of the module. Due to the longtime experience of our developers, it happens quite often that entrapments are indentified in the course of the review.Supply of Software, especially Board Support Packages and hardware-close driver for the required operating system. Therefore you shorten your development time and reduce your costs.
    Starting-up of your baseboard. In case that the starting-up of your baseboard with our module does not work at once, we support you by a structural fault analysis in order to quickly find the reason and repair it. We provide you with reference notes to power-on's e.g. power-on of a CAN controller to the local bus, as well as with application notes.Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase.
    As system service provider TQ is able to take over the development, production and test of your baseboard. Therefore you get the whole tested unit from one hand. Please just ask us. We are pleased to consult you!

  • Support

    Support-Umfang: Unsere Field Application Engineers stehen Ihnen vor, während und nach Ihrer Designphase mit Rat und Tat zur Seite. Lesen Sie mehr zum >>> Umfang des Support-Angebots. Downloads: Aktuelle Downloads wie Produktdatenblätter, Manuals, Application notes oder Software und Treiber finden Sie auf dieser Seite im Bereich "Downloads". Support-Wiki: Umfangreiche Informationen aus dem Softwarebereich wie BSP-Dokumentationen, FAQs, Anwendungshinweise, Beispielcodes und Tipps & Tricks stehen Ihnen in unserem >>> TQMLS102xA Support Wiki zur Verfügung. Kontakt: Weitergehende Fragen beantworten wir Ihnen gerne. Bitte kontaktieren Sie uns dazu über unser >>> Supportformular.


__Unsere Field Application Engineers stehen Ihnen vor, während und nach Ihrer Design-Phase zur Seite. Aktuelle Downloads wie Produktdatenblätter, Manuals, Application Notes sowie Software und Treiber finden Sie im Downloadcenter.


__Umfangreiche Informationen aus dem Softwarebereich wie Beispielcodes, Tipps und Tricks, Anwendungshinweise, FAQs sowie Bsp.-Dokumentationen stehen Ihnen in unserem Support Wiki zur Verfügung.

Mit TQ zum Erfolg

Von der Idee bis zur Serienreife entwickelt und produziert TQ elektronische Leiterplatten, Baugruppen und Geräte nach kundenspezifischen Anforderungen (E²MS). Das Dienstleistungsspektrum reicht von Anwendungen im Bereich der Industrieelektronik über Medizintechnik, Automatisierungstechnik und Messtechnik bis hin zur Verkehrs- und Transporttechnik.

  • Langjährige Erfahrung und Know-How
  • Zertifiziertes Support-Team
  • Obsolescence Management
  • Partnerschaftliche Zusammenarbeit
  • Termintreue und Liefersicherheit
  • Qualitätskontrolle durch Zertifizierungen