Embedded module TQM5200S
with MPC5200B – NRND
Power Architecture module with MPC5200B from NXP.
- NXP MPC5200B (Power Architecture), 400 MHz
- Substantial computing power, numerous interfaces
- Multifunctional external bus (PCI / ATA / IDE)
- Up to 6 serial interfaces
- Compact outer dimensions (60mm x 56mm)
- Low power dissipation, passive cooling
- Robust 0,8mm mezzanine connection system, long-term availability
- Temperature sensor
The embedded module with the MPC5200B processor is available in a very tiny size. The small dimensions of the TQM5200S are especially notable (60mm x 56mm compared to 60mm x 80mm) along with the additional temperature sensor on the module. This gives you more space and enhances reliability and monitoring.
Other interfaces & busses
Data bus width:
Address bus width:
Up to 36
Local bus frequency:
32-Bit / up to 66 MHz
BestComm DMA sub system
NXP MPC5200 (Power Architecture)
0 - 32 KByte
0 - 1 MByte
4 - 32 MByte
16 MByte - 128 MByte
Temperature range, extended:
-40°C ... +85°C
0°C ... +70°C
NRND (not recommended for new designs)
60mm x 56mm
Ethernet 10/100 Mbit (L2 Switch):
Operating systems / User interfaces
Linux, VxWorks, QNX
for Embedded module TQM5200S
MPC5200B / 400 MHz, 32 MByte Flash, 64 MByte SDRAM, 512 kByte SRAM, 4 kByte EEPROM, without graphic, with temperature sensor, -40°C ... +85°C
At TQ you not only get first-class embedded systems - we also provide a series of benefits around the embedded module: We support you in defining your requirements for your project. The technical specification serves as guideline for all persons that are involved in the development process. For a fast and easy starting-up we provide starter kits. Through the plug-and-play principle, the software evaluation can be started, if the actual target hardware is not yet available. Due to this a product can be launched faster, reasonably priced and more safely. We support you concerning the selection of components as well as Obsolescence management. Thus your products are protected against obsolete components, complex redesigns, doubtful sources and cost-intensive brokerwares. If desired we arrange a circuit diagram review for your baseboard directly by the developer of the module. Due to the longtime experience of our developers, it happens quite often that entrapments are indentified in the course of the review.Supply of Software, especially Board Support Packages and hardware-close driver for the required operating system. Therefore you shorten your development time and reduce your costs. Starting-up of your baseboard. In case that the starting-up of your baseboard with our module does not work at once, we support you by a structural fault analysis in order to quickly find the reason and repair it. We provide you with reference notes to power-on's e.g. power-on of a CAN controller to the local bus, as well as with application notes.Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase As system service provider TQ is able to take over the development, production and test of your baseboard. Therefore you get the whole tested unit from one hand. Please just ask us. We are pleased to consult you!
Scope of support:Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase. Read more about the >>> scope of support.Downloads:The latest documentation like product data sheets, manuals, application notes or software and driver are available in the „Downloads“ section on this page.Contact:We are pleased to answer further questions. Please use our >>> support form to contact us.
Our Field Application Engineers offer support during all phases of a project, from consulting and design-in to after-sales assistance. Current data sheets and product catalogs can be found in our Download Center.
TQ - Technology in Quality
TQ stands for technology with highest quality standards. For us this name represents a challenge which we do our best to meet at every single step of the process – from the original idea right through to the finished product. We see ourselves in this context as partners for our customers and support them in the pursuit of their strategic objectives. As a corporate group we cover the whole bandwidth of this comprehensive product and service spectrum and we can thus meet the special wishes of all our customers with great flexibility. TQ – your reliable partner for the whole world of electronics.
- TQ offers the complete range of services - from concept to finished product.
- All services are available on a modular basis or as a complete package - highly customized.
- Our product range covers various areas such as drive motors as well as minimodules.
- Embedded modules enable cost-efficient and timesaving solutions to keep up with today’s rapidly developing high technology market.