Embedded module TQM5200
Power Architecture module with MPC5200 from NXP.
- NXP MPC5200 (Power Architecture), 400 MHz
- High graphics performance through integrated graphics controller (SM501/SM502)
- Substantial computing power, numerous interfaces
- Multifunctional external busses (PCI / ATA / IDE)
- Compact outer dimensions (80mm x 60mm)
- Low power dissipation, passive cooling
- Robust 0,8mm mezzanine connection system, long-term availability
The embedded TQM5200 module is based on the MPC5200 Power Architecture processor by NXP. With 760 MIPS at a clock frequency of 400 MHz, the MPC5200 achieves a performance class that can handle a wide range of applications. It comes with up to six serial interfaces (PSC1 to PSC6). These can be used for numerous different synchronous and asynchronous protocols. The J1850 controller originates from the automotive sector as does the MSCAN module (MSCAN: Motorola scalable area network) with two CAN controllers. Additional serial busses are available through the two I2C controllers and the SPI controller. Both controllers support both master and slave mode.
80mm x 60mm
0°C ... +70°C
NRND (not recommended for new designs)
Temperature range, extended:
-40°C ... +85°C
Other interfaces & busses
Address bus width:
Local bus frequency:
32-bit / up to 66 MHz
Data bus width:
Up to 53
Operating systems / User interfaces
Linux, VxWorks, QNX
18- / 24-bit
200 MHz DAC up to resolution 1280 x 1024
1024 x 768
NXP MPC5200 (Power Architecture)
4 MByte - 32 MByte
0 - 32 KByte
16 MByte - 256 MByte
0 - 1 MByte
for Embedded module TQM5200
for Embedded module TQM5200
NXP MPC5200B / 400 MHz, 32 Mbyte Flash, 128 MByte SDRAM, 1 MByte SRAM, 8 kByte EEPROM, with graphic SM501, with temperature sensor, -40°C ... +85°C
At TQ you not only get first-class embedded systems - we also provide a series of benefits around the embedded module: We support you in defining your requirements for your project. The technical specification serves as guideline for all persons that are involved in the development process. For a fast and easy starting-up we provide starter kits. Through the plug-and-play principle, the software evaluation can be started, if the actual target hardware is not yet available. Due to this a product can be launched faster, reasonably priced and more safely. We support you concerning the selection of components as well as Obsolescence management. Thus your products are protected against obsolete components, complex redesigns, doubtful sources and cost-intensive brokerwares. If desired we arrange a circuit diagram review for your baseboard directly by the developer of the module. Due to the longtime experience of our developers, it happens quite often that entrapments are indentified in the course of the review.Supply of Software, especially Board Support Packages and hardware-close driver for the required operating system. Therefore you shorten your development time and reduce your costs. Starting-up of your baseboard. In case that the starting-up of your baseboard with our module does not work at once, we support you by a structural fault analysis in order to quickly find the reason and repair it. We provide you with reference notes to power-on's e.g. power-on of a CAN controller to the local bus, as well as with application notes.Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase. As system service provider TQ is able to take over the development, production and test of your baseboard. Therefore you get the whole tested unit from one hand. Please just ask us. We are pleased to consult you!
Scope of support: Our Field Application Engineers are pleased to assist you with words and deeds before, during and after your design phase. Read more about the >>> scope of support. Downloads: The latest documentation like product data sheets, manuals, application notes or software and driver are available in the „Downloads“ section on this page. Contact: We are pleased to answer further questions. Please use our >>> support form to contact us.
Our Field Application Engineers offer support during all phases of a project, from consulting and design-in to after-sales assistance. Current data sheets and product catalogs can be found in our Download Center.
Mit TQ zum Erfolg
Von der Idee bis zur Serienreife entwickelt und produziert TQ elektronische Leiterplatten, Baugruppen und Geräte nach kundenspezifischen Anforderungen (E²MS). Das Dienstleistungsspektrum reicht von Anwendungen im Bereich der Industrieelektronik über Medizintechnik, Automatisierungstechnik und Messtechnik bis hin zur Verkehrs- und Transporttechnik.
- Langjährige Erfahrung und Know-How
- Qualifiziertes Support-Team
- Obsolescence Management
- Partnerschaftliche Zusammenarbeit
- Termintreue und Liefersicherheit
- Qualitätskontrolle durch Zertifizierungen